ASTM A-48 to A-312 ASTM A-333 to A-691 ASTM A-500 Tubing ASTM Reference Chart Metallurgy Pipe Specifications Glossary of Terms

Nibco Chemical Resistance Chart

Only general information is presented here. Please contact ASTM for greater detail. ASTM Number Explanation B-75 This specification covers seamless copper, round and rectagular, including square tube suitable for general engineering purposes. B-75 This specification covers Copper UNS No. C12200 seamless copper water tube suitable for general plumbing, and similar applications for the conveyance of fluids, and commonly used with solder, flared, or compression type fittings. B-127 This specification covers rolled nickel-copper alloy (UNS04400) plate, sheet and strip. B-160 This specification covers nickel (UNS N02200) and low carbon nickel (UNS N02201) in the form of hot-worked and cold-worked rod and bar. B-161 This specification covers nickel (UNS N02200) and low- carbon nickel (UNS N02201) in the form of cold-worked seamless pipe and tube. B-162 This specification covers rolled nickel (UNS N02200) and low-carbon nickel (UNS N02201) plate, sheet and strip. B-163 This specification covers seamless tubes of nickel and nickel alloys for use in condenser and heat-exchanger service. Please see the appropriate ASTM specification for all the alloys covered by this specification. B-164 This specification covers nickel-copper alloys (UNS N04400 and N04405), in the form of hot-worked and cold-worked rod and bar and cold-worked wire. B-165 This specification covers nickel-copper alloy (UNS N04400), in the form of cold-worked seamless pipe and tube. B-166 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06690, N06025 and N06045) and nickel-chromium-cobalt-molybdenum alloy (UNS N06617) in the form of hot-finished and cold-worked rounds, squares, hexagons, rectangles and cold-worked wire. B-167 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06690, N06025 and N06045) in cold-worked annealed, hot-worked annealed and hot- finished seamless pipe and tube intent for general corrosion resistant and heat resistant applications. B-168 This specification covers rolled nickel-chromium-iron alloys (UNS N06600, N06601, N06690, N06025 and N06045) and nickel-chromium-cobalt-molybdenum alloy (UNS N06617) plate, sheet and strip. B-210 This specification covers aluminum and aluminum-alloy drawn seamless tubes in straight lengths and coils for general purpose and pressure applications in various alloys, tempers and thicknesses. Coiled tubes are generally available only as round tubes with a wall thickness not exceeding 0.083 in. and only in nonheat-treatable alloys. Please see the appropriate ASTM specification for all the alloys covered by this specification. B-221 This specification covers aluminum and aluminum alloy extruded bar, rod, wire, shape and tube in aluminum- alloys. Please see the appropriate ASTM specification for all the alloys covered by this specification. B-234 This specification covers aluminum-alloy drawn seamless round tube in straight lengths designated for use in surface condensers, evaporators and heat exchangers. Please see the appropriate ASTM specification for all the alloys covered by this specification. B-241 This specification covers aluminum and aluminum-alloy seamless pipe and extruded round seamless tube in various alloys and tempers intended for pressure applications. Please see the appropriate ASTM specification for all the alloys covered by this specification. B-247 This specification covers aluminum-alloy die forgings, hand forgings and rolled ring forgings. Please see the appropriate ASTM specification for all the alloys covered by this specification. B-361 This specification covers only factory-made wrought aluminum and aluminum-alloy welding fittings in contrast to field-made fittings. Please see the appropriate ASTM specification for all the alloys covered by this specification. B-366 This specification covers wrought welding fittings for pressure piping, factory-made from nickel and nickel alloys. The term welding applies to butt-weld or socket-welding parts such as 45 and 90 elbows, 180 bends, caps, tees, reducers, lap-joint stub ends and other types, as covered by ANSI B 16.9, ANSI B 16.11, ANSI B 16.28 and MSS-SP43. B-407 This specification covers UNS N08800, N08801, N08810 and N08811 in the form of cold-worked and hot finished annealed seamless pipe and tube. Alloy UNS N08800 is normally employed in service up to and including 1100F. Alloys UNS N08810 and N08811 are normally employed in service temperatures above 1100F where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in the temperature range. B-408 This specification covers UNS N08800, N08801, N08810 and N08811 in the form of cold-worked and cold-worked rod and bar. Alloy UNS N08800 is normally employed in service up to and including 1100F. Alloys UNS N08810 and N08811 are normally employed in service temperatures above 1100F where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in the temperature range. B-409 This specification covers UNS N08800, UNS N08810 and UNS N08811 in the form of rolled plate, sheet and strip. Alloy UNS N08800 is normally employed in service temperatures up to and including 1100 F or 593 C. Alloys UNS N08810 and UNS N08811 are nomally empolyed in service temperatures above 1100 F or 593 C, where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in this temperature range. B-462 This specification covers forged or rolled UNS N08020, UNS N08024, UNS N08026, and UNS N08367 pipe flanges, forged fittings and valves and parts intended for corrosive high-temperature service. B-463 This specification covers UNS N08020, UNS N08026 and UNS N08024 alloy plate, sheet and strip. B-464 This specification covers welded UNS N08020, UNS N08024 and UNS N08026 alloy pipe for general corrosion- resisting and low or high-temperature service. B-468 This specification covers welded UNS N08020, UNS N08024 and UNS N08026 alloy boiler, heat exchanger and condenser tubes for general corrosion-resisting and low or high-temperature service. B-474 This specification covers electric fusion welded UNS N08020, UNS N08026 and UNS N08024 alloy pipe suitable for high-temperature or corrosive service. (Although no restrictions are placed on the sizes of pipe that may be furnished under this specification, commercial practice is commonly limited to sizes not less than NPS 8). B-483 This specification covers aluminum and aluminum-alloy drawn tubes in straight lengths and coils for general purpose applications in various alloys. Please see the appropriate ASTM specification for all the alloys covered by this specification. B-574 This specification covers rod of low-carbon nickel-molybdenum-chromium alloys, (UNS N10276, N06022 and N06455), low-carbon nickel-chromium-molybdenum alloy (UNS N06059),and low-carbon nickel-chromium-molybdenum-tungsten alloy (UNS N06686) for use in general corrosive service. B-575 This specification covers plate, sheet and strip of low-carbon nickel-molybdenum-chromium alloys, (UNS N10276, N06022 and N06455), low-carbon nickel-chromium- molybdenum alloy (UNS N06059),and low-carbon nickel-chromium- molybdenum-tungsten alloy (UNS N06686) for use in general corrosive service. B-587 This specification covers round, rectangular, and square-welded copper-alloy tube for general engineering purposes. B-619 This specification covers welded pipe of nickel and nickel-colbalt alloys (UNS N10001, N10665, N12160, N10629, N10675, N10276, N06455, N06007, N06975, N08320, N06002, N06022, N06059, N06230 and N06686). B-622 This specification covers seamless pipe and tube of nickel and nickel-colbalt alloys (UNS N10001, N10665, N12160, N10629, N10675, N10276, N06455, N06007, N06975, N08320, N06002, N06022, N06059, N06230 and N06686). B-626 This specification covers welded tube of nickel and nickel-colbalt alloys (UNS N10001, N10665, N12160, N10629, N10675, N10276, N06455, N06007, N06975, N08320, N06002, N06022, N06059, N06230 and N06686). B-729 This specification covers UNS N08020, UNS N08026 and UNS N08024 seamless, cold-worked pipe and tube intended for general corrosive service.

Send mail to sysadm@howellpipe.com with questions or comments about this web site.
Copyright © 1998 Howell Pipe & Supply, A Division Of Howell Plumbing Supplies DASCO limited
Last modified: November 13, 2006 (DB)